Dark Light
-53%

Juniper Networks EX2300-48P Ethernet Switch


The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for access-layer deployments in branch and remote offices, as well as enterprise campus networks. To simplify network operations, the EX2300 is hardware-ready to act as a satellite device to support a Juniper Networks Junos Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform.

$2,421.00 $5,177.00

Compare

The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for access-layer deployments in branch and remote offices, as well as enterprise campus networks. To simplify network operations, the EX2300 is hardware-ready to act as a satellite device to support a Juniper Networks Junos Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform. For smaller networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch.

The Juniper Networks EX2300 line of Ethernet switches offers a compact, high performance solution for supporting today’s converged network access deployments.

Each EX2300 switch includes an ASIC-based Packet Forwarding Engine (PFE) with an integrated CPU to consistently deliver wire-rate forwarding, even with all control plane features enabled. Based on existing, field-proven Juniper Networks technology, the PFE brings the same level of carrier-class performance and reliability to the EX2300 switches that Juniper Networks routers bring to the world’s largest service provider networks.

Select EX2300 models also support the 802.3af Class 3 Power over Ethernet (PoE) and 802.3at PoE+ standards for supporting networked devices such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones in converged networks. The PoE-enabled EX2300 switches include a maximum system budget of 740 watts to deliver up to 30 watts to select ports.

The EX2300 fixed-configuration Ethernet switches provide exceptional value to enterprise customers by supporting the following key technologies:

  • Juniper Networks Junos Fusion Enterprise allows more than 100 EX2300 switches to be configured as satellite devices that connect to EX9200 core aggregation devices.
  • Virtual Chassis technology enables up to four interconnected EX2300 switches to form a single logical device.
  • Flexible 4x1GbE SFP/10GbE SFP+ uplinks provide high-speed connectivity to aggregation layer switches or other upstream devices.
  • Up to 48 10/100/1000BASE-T ports are available with or without PoE/PoE+.
  • Energy Efficient Ethernet (EEE) support is provided on 1GbE ports.
  • Complete Layer 2 and basic Layer 3 switching capabilities are available.
  • Simplified management uses Juniper Networks Junos Space Network Director and J-Web GUI.

Additional features include:

  • PoE-enabled EX2300 switches can simultaneously deliver up to 15.4 watts of standards-based 802.3af Class 3 PoE to a maximum of 48 ports or 30 watts of standards-based 802.3at PoE+ to a maximum of 24 ports, based on a total system budget of 740 watts.
  • Uplink ports can be configured as Virtual Chassis interfaces and connected via standard 10GbE optics interfaces (optional license required).
  • Fixed power supply and uplink ports ensure operational simplicity.
  • Low power consumption, low acoustic fans, and a small 10-inch deep footprint enable flexible, environmentally friendly deployment.
  • Support for L2 protocols as well as L3 protocols like RIP and static routing are included in the base license.
  • An optional enhanced license is available for supporting additional L3 protocols such as OSPF, Internet Group Management Protocol (IGMP v1/v2/v3), Protocol Independent Multicast (PIM), Bidirectional Forwarding Detection (BFD), and Virtual Router Redundancy Protocol (VRRP).
  • Support is available for IPv6 management, including neighbour discovery, telnet, SSH, DNS, system log, and NTP.
  • A single release train for Juniper Networks Junos operating system is supported to ensure a consistent control plane feature implementation.
  • Modular Junos OS prevents a switch reboot if a single protocol feature fails.
  • The device integrates with Juniper Networks Unified Access Control to provide per-user access control and policing.
  • Built-in Web interface (Juniper Networks J-Web Software) is provided.
  • RJ-45 serial console port is available.
  • USB mini console port is included.
  • Out-of-band Ethernet management port is provided.
  • Reduction of Hazardous Waste (RoHS) is certified.
SKU: EX2300-48P Category:
Weight 12 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Juniper Networks EX2300-48P Ethernet Switch”

There are no reviews yet.